News

Ship, dredging, sand sucking - Class: 1000 m3 / hour & class: 2000 m3 / hour

ĐẶT ĐÓNG TÀU NẠO VÉT TẠI - TRUNG QUỐC
https://www.tengyuanpipes.com/

CONDITIONS FOR RENTING TRAINING VESSELSFor ships: 1000 m / h & 20000 m3 / h. The ship has a suction function - Discharge of the transport ship or pushing it to the far shore up to 1.5 km - Load of 1000 tons to 2000 tons. In case, the lessee needs to push more than 1.5 Km, the lessee will discuss with the shipowner to buy more pumps.

CONDITIONS FOR RENTING OF DRINKING SHIP - 1000m3 / hour

(According to Dutch design approved by DKK)

Newly built vessels include:

- Ship engine: 550 HP.

- Hydraulic propeller system (Cross-bow): 120 HP

- Output of main pumps: 2,200 HP - 5,600 m3 / h - Pressure head 60 m - (Sludge + Sand 100%: 1000 m3 / h).

- Hydraulic system, head dredge: 100 Kw

- High pressure water system using sand suction: 100 Kw

- Submersible pump for sand mining - 315 Kw - (02 pumps)

- Generator: 1,000 Kw (01 machine)

- Crane: 18 m - 20 Tons

- Nose crane: 8 m 5 tons

- System of iron buoys + rubber tubes, above water: 120 m

- 50 HP construction boat

- Ship size: (42 m x 9 m x 1.5 m). (Ship operates at max depth: 18 m)

1-The charterer, must prove, I have a project, the construction dredging contract with the minimum level as follows:

- Minimum construction time: 12 months

- Minimum construction volume: 2,000,000 m3

2-The charterer, responsible for: All pipelines, construction equipment. (In addition to the shipboard area). Provide petrol and oil enough for daily operation.

3-After receiving the ship, the charterer must organize and staff the crew fully, to bring the ship into good operation. The owner of the ship announced that 02 officers followed the ship, doing the task: Guide and supervise the operation of the lessee's ship.

4-Rental price is calculated as follows:

Based on the completed volume in the month of the party (Chartering). The charterer will pay the ship rental to the ship owner at the price: 20,000 VND / 01 m3. (Petrol - Party A provides)

-The above price is a temporary price, depending on the difficulty of the project, the two parties discuss and adjust the price accordingly, before signing the charter contract.

5-Before receiving the ship for 90 days, the lessee must transfer the deposit, in the amount of VND 20 billion to the shipowner.

-The deposit amount will be recovered by the lessee as follows: Based on the value of the monthly rent that the lessor is entitled to. Then 70%, the ship owner, pay the charterer, deduct from the deposit, the remaining 30% will pay the ship owner.

-In case, the project runs out of volume, but the deposit amount is still not deducted. The two parties shall make a written record to record the following work, accounting for the next deduction.

(Customers may not hire and buy off the entire ship, for VND 40 billion)

CONDITIONS FOR RENTING - 2000m3 / hour TRAINING SHIP

(According to Dutch design approved by DKK)

Newly built vessels include:

- Ship engine: 550 HP.

- Hydraulic propeller system (Cross-bow): 120 HP

- Production of 02 main pumps: (2,200 HP - 5,600 m3 / h - 60 m pressure head) x 02 pumps.

(Mud and Sand output: 100%: 2000 m3 / h).

- Hydraulic system, head dredge: 200 Kw

- High pressure water system using sand suction: 200 Kw

- Submersible pump for sand mining - 315 Kw - (04 pumps)

- Generator: 1,500 Kw (01 machine)

- Crane: 18 m - 20 Tons

- Nose crane: 8 m 5 tons

- System of iron buoys + rubber tubes, above water: 240 m

- 50 HP construction boat

- Ship size: (45 m x 10.5 m x 2 m) .. (Vessel operates at max depth: 20 m)

1-The charterer, must prove, I have a project, the construction dredging contract with the minimum level as follows:

- Minimum construction time: 18 months

- Minimum construction volume: 3,000,000 m3

2-The charterer, responsible for: All pipelines, construction equipment.

3-After receiving the ship, the charterer must organize and staff the crew fully, to bring the ship into good operation. The owner of the ship announced 02 officers to follow the ship, doing the task: Guide and supervise the ship's operation of the lessee. Provide fuel and enough for daily operation.

4-Rental price is calculated as follows:

Based on the completed volume in the month of the party (Chartering). The charterer will pay the ship rental to the ship owner at the price: 20,000 VND / 01 m3. (Petrol - Party A provides)

-The above price is a temporary price, depending on the difficulty of the project, the two parties discuss and adjust the price accordingly, before signing the charter contract.

5-Before receiving the ship for 90 days, the lessee must transfer the deposit, amounting to VND 30 billion to the shipowner.

-The deposit amount will be recovered by the lessee as follows: Based on the value of the monthly rent that the lessor is entitled to, 70% shall be recovered by the lessee, deducted from the deposit, the remaining 30% will pay the ship owner.

-In case, the project runs out of volume, but the deposit amount is still not deducted. The two parties shall make a written record to record the following work, accounting for the next deduction.

(Customers may not hire and buy off the entire ship, for 60 billion VND)

CONDITIONS FOR RENTING TRAINING VESSELS

(Abdominal aspiration) 5000 tons 2200 m3

For 5000 ton dredge. Sediment storage capacity of 2200 m3. The vessel has the function of sucking into the abdomen

& Auto exhaust - Time of both suction and sand discharge: 3 hours.

CONDITIONS FOR VESSEL LEASE (Absorption) - 800m3 / hour

Converted (New) vessels from 5000-ton transports include:

- Capacity of ship machine: 2200 HP.

- Production of 02 main pumps: (1000 HP - 2,200 m3 / h - Pressure head of 60 m) x 02 pumps.

(Sludge production + Sand 100%: 800 m3 / h).

- Hydraulic system, head dredge: 75 Kw

- High pressure sand water system: 75 Kw

- Submersible pumps for sand mining - 150 Kw - (02 pumps)

- Generator: 700 Kw (01 machine)

- Crane: 18 m - 20 Tons

- System of iron buoys + rubber tubes, above water: 120 m

- 50 HP construction boat

- Ship size: (45 m x 10.5 m x 2 m) .. (Vessel operates at max depth: 20 m)

CONDITIONS FOR LEASEING DRAINING SHIP - 5000 Ton - 2200 m3 (Self-suction & self-discharge)

1-The charterer, must prove, I have a project, the construction dredging contract with the minimum level as follows:

- Minimum construction time: 18 months

- Minimum construction volume: 1,000,000 m3

2-The charterer, responsible for: All pipelines, construction equipment. (In addition to the shipboard area.) Provide fuel, enough for daily operation.

4-Rental price is calculated as follows:

Based on the completed volume in the month of the party (Chartering). The charterer will pay the ship rent to the shipowner at the price of 3 USD / 01 m3.

-The above price is a temporary price, depending on the difficulty of the project, the two parties discuss and adjust the price accordingly, before signing the charter contract.

5-Before receiving the ship for 120 days, the lessee must transfer the deposit, amounting to USD 3,000,000

for ship owners.

-In case, the project runs out of volume, but the deposit amount is still not deducted. The two parties shall make a written record to record the following work, accounting for the next deduction.

(Customers may not hire and buy off the entire ship, for: USD 6,000,000)

November 18, 2017.

DAI SON NAM JOINT STOCK COMPANY

Dredging vessel : IHC Beaver® 65 DDSP (manufactured in the Netherlands)

Reliable, fuel efficient, low maintenance IHC Beaver® 65 DDSP

high cost and productivity levels at all dredging depths.

This powerful dredger is equipped with modern technology.

Key features include:

• low cost per cubic meter

• a diesel direct driven submersible pump (DDSP) generates it

can be dredged at high mixed density

• Curve® impellers combine high efficiency with low energy consumption and suction performance

• first-class diagnostics and ergonomics

• wear-resistant parts for dredging pumps

• Certified Grade (BV Coastal Area)

• integrated spud shipping settings.

IHC Beaver® 65 DDSP Cutter hút Suction Dredge

Reliable and efficient

The IHC Beaver® is renowned for its sturdy, reliable construction

Works and great performance. To date, IHC Royal (IHC) has

supplied more than 800 of these standard cutter suction dredges

all around the world. Can be shipped and delivered from the warehouse

The IHC Beaver® dredgers can be dismantled for transport by road, rail or sea. A wide range of optional equipment is available, as well as additional ancillary equipment, such as work boats and exhaust pipes. These ships are mainly delivered from stock.

Service and Support IHC can provide a full package of spare parts, supportive maintenance, equipment training programs, service dredging consultants, and dredging operators for practical and operational guidance. to try on.

Dimensions Overall length (lift up), approx. 58.0m

Length over float 43.50m Width 12.44m

Depth 2.97m Side bridge 43.50 x 4.67 x 2.97m

Full deck draft 1.95m

Maximum standard dredging depth 18.0m

Suction pipe diameter 650mm

Exhaust pipe diameter 650mm Total installed power 2,819kW

Bladder and swing winch -30 rpm

Pulling rope, first layer 240kN

Maximum line speed 23m/min

Wire diameter 36mm

Drum diameter 762mm Cord length 150m

Dredge Pump Type IHC HR/MD 121-26-60, with Curve® impeller inside Caterpillar 3516C SCAC

Continuous motor power 1,825kW @ 1,600 rpm

Specific fuel consumption 206.9g/kWhr

Auxiliary power (cutter, winch and pole)

Engine type C32 DITTA Acert

Maximum power 994kW

Specific fuel consumption 207.2g/kWh

CutterType IHC 20-CB-ACR-2220-550

Power at shaft 700kW to absorb load peak

Diameter 2,220mm

Maximum speed, approx. 30 rpm

DANH SÁCH BƠM THỦY LƯC-NẠO VÉT CHÌM-LẮP RÁP TẠI VIỆT NAM

CHARACTERISTICS NT PUMPS
	TN 100	TN 150	TN 200	TN 250	TN 300	TN 400	UNIT
Max - lưu lượng	300	500	800	1250	1800	3150	[m3/h]
Max - vòng quay	1350	1300	1200	900	750	600	[rpm]
Max - công xuất	30	75	110	190	300	500	[kW]
Đường kính ống	Ø100	Ø150	Ø200	Ø250	Ø300	Ø400	[mm]
Đường kính ống	Ø100	Ø150	Ø200	Ø250	Ø300	Ø400	[mm]
Cỡ hạt	50	75	125	130	155	210	[mm]
Weight (Bơm thủy lực)	550	950	1200	2000	3500	7750	[kg]
Weight (Bơm điện)	1000	1375	1900	2900	4600	9150	[kg]
Max - Áp lực thủy lưc motor	250	250	250	250	300	300	[bar]
Max-Lưu lượng dầu - Bơm	85	195	290	425	600	1000	[L/min]
Lưu lượng dầu - Đầu xén	15-20	15-20	35-50	35-50	70-110	70-110	[L/min]
Lưu lượng dầu-Đầu xén đôi	30-40	30-40	70-100	70-100	140-220	140-220	[L/min

Bộ máy cung cấp nguồn thủy lực.

CONDITIONS FOR RENTAL TRAINING PATTERN 5000 tons 2200 m3
For a 5000 ton ship. Capacity of sediment is 2200 m3. The vessel is suction in the abdomen & Automatic discharge - The time to both suck and sand discharge: 3 hours.
CONDITIONS FOR RENTAL TRAINING - 5000 MT - 2200 m3
1. The charterer must prove that he / she has a project or a dredging contract with the minimum level as follows:
- Minimum construction time: 12 months
- Minimum amount of construction: 1,000,000 m3
2-The charterer, responsible for: All pipelines, construction equipment. (Outside the ship's area).
3. After receiving the ship, the lessee shall have to organize and pay the crew of the crew in full to put the ship into good operation. The shipowner shall prepare two crews to accompany the vessel and shall perform the following tasks: Instruct and supervise the operation of the ship of the lessee.
4. Rental price is calculated as follows:
Based on the volume completed in the month of the party (Ship hire). The charterer shall pay the shipowner a fee of 2 USD / 01 m3 for the shipowner.
- The above price is the temporary price, depending on the level of difficulty of the project, the two sides discuss, adjust the price accordingly, before signing the charter boat.
5-Before accepting the ship 60 days, the lessee must transfer the deposit, amounting to USD 2.5 million to the shipowner.
- The amount of the deposit will be recovered by the lessee as follows: Based on the monthly rent rented by the lessor, 70% is deducted by the lessee from the deposit, 30% will pay the owner.
-In case, the project runs out of volume, the deposit still has not been cleared. The two parties shall make a minute for the latter to further account.
November 18, 2017.
DAI NAM NAM JOINT STOCK COMPANY

Chia sẻ: