SEARCH

Visittor

Online: 10
Today: 129
Yesterday: 298
Total: 455037

Home/
Category/
Unburnt brick production line

Unburnt brick production line

REIT RT15A Production Line

Fully automatic concrete bricks

Kích thước pallet	*1400 ×1150 ×16 mm（Thép*）
Công suất/mỗi Pallet	*15 khối rỗng 400×200×200mm*
Kích thước của máy	*7800×2800×3600(4000)mm*
Chu kỳ hoạt động	*15-30s (tùy thuộc vào sản phẩm)*

Thông số kỹ thuật sản phẩm

Kích thước pallet:	1400 ×1150 ×16 mm（Thép）
Chiều cao sản phẩm tối thiểu:	50mm
Chiều cao sản phẩm tối đa:	450mm
Chu kỳ hoạt động:	15-30s (tùy thuộc vào sản phẩm)
Công suất/mỗi Pallet:	15 khối rỗng 400×200×200mm
Động cơ rung (Servo):	4×18kw
Động cơ rung lên khuôn:	2×1,1kw
Sức mạnh của trạm thủy lực:	58,7kw
Áp suất định mức của trạm thủy lực:	16mpa
Lực dao động tối đa:	200kn
Công suất của phễu bê tông nền:	1500L
Kích thước của máy:	7800×2800×3600(4000)mm
Tổng công suất lắp đặt của dây chuyền sản xuất:	450KW

The brick press has three main parts, including base concrete feeding equipment, surface concrete feeding equipment and compaction system. For the fourth version of the REIT QFT15, the base concrete dispenser and the face concrete dispenser can be moved independently, for easier machine adjustment and repair. This innovation provides more space for workers to operate, maintain and adjust machinery. It can be commonly used to produce pavers with and without surface mixes, curb stones, hollow blocks and similar components.

Green block conveyor Pos.1

It is used to transport pallets with green blocks to the chain elevator in an orderly manner. It includes internal transfer device and cow conveyor.

The internal transfer device has a 4-parallel bar structure and is driven by a cylinder, so it operates more stably.

The crawler conveyor is combined with a fixed bucket and a mobile frame. The moving frame can move the pallet horizontally one step in one cycle. The movement of the frame with the rack and pinion mechanism is controlled by an electric motor controlled by a frequency controller. Start and stop positions are controlled by a highly sensitive switch. At the end of the movement there is a mechanical restraint device and forced protection to ensure product quality.

Main parameters:

Device travel distance: 120mm

Drive motor: 4kw

Transport speed: 0.20—0.48m/s

Pos.2 rotating brush for green block

It is for cleaning fresh products. The broom body is a highly durable swirl nylon broom, supported by a steel frame. The height of the brush can be adjusted according to the height of the product. It is driven by a motor and speed reduction chain.

Main parameter:

Động cơ dẫn động: 0,75kw
Kích thước của sợi: 0,4-0,5mm
Tốc độ quay: 137 vòng/phút

Thang máy chuỗi Pos.3 với 12 lớp

It is used to lift pallets with green blocks to certain position and store them according to designed distance and layer. Once full, the green block pallets are transported to the drying oven by car. Its frame is designed in cut steel with two side safety nets. The support corners are fixed on the bushing roller chain.

The lifting and storage device is formed by steel hooks. The chains work in reverse synchronization causing the pallet to stay horizontal when raised or stopped. The chains on both sides work stably.

The synchronous speed transmission for which REIT has a patent driven by an electric motor is equipped to ensure synchronous lifting of the chain. The synchronous speed gearbox is equipped with automatic locking to protect against danger during power failure.

The lifting height of high-quality proximity sensor controller and the combination of beam sensor with proximity sensor controller make the device work and protect safely with double protection device.

Main parameter:

Drive motor: 11kw Moving speed: 0.1m/s

Number of stages: 12 Pallets per stage: 2

Stage distance: 400mm

Pos.4 Finger cart with 12 layers

It is used to transport green block pallets from the chain elevator to the rack or handling chamber and to return processed products to the chain lowering device. The finger car assembly includes the finger car, the base car and the control system.

Finger car

The finger cart is composed of base frame, fixed bracket, finger lifting table, hydraulic station, driving device and threading device. The function is to lift and transport pallets with blocks.

The steel leg frame is fixed in two shifts by wheels (one driven, one driven) driven by a frequency controlled motor. The fixed bracket is made of rectangular steel and fixed on the base frame to support and guide the finger lifting movement. There are 12 finger fork branches in the finger elevator. The finger lifting is guided by 4 groups of wheels fixed on the fixed bracket and driven by hydraulic cylinders. To match the length of the cable, a synchronous torsion roller device is used (including roller parts, roller station, shrinking and stretching device, and cable clamping device, etc.) to ensure synchronous extension and contraction of the cable with the vehicle finger. This mechanism helps power supply and control signals to be input and output stably.

Main parameters:

Drive power: 11kw

Moving speed: 0.1-1.2m/s

Distance between layers: 400mm Layers

: twelfth

Pallets per stage: 2

Hydraulic pump capacity: 4kw

Working pressure of hydraulic system: 8mpa

Platform vehicle:

Platform trucks are steel transport platforms used to carry dump trucks between elevator, dryer, and lowering machine locations.

The platform welded load-bearing steel frame is equipped with two lower shifts and large flanged wheels and is driven by a frequency-controlled motor. On the platform there are rails and safety devices. Except for electronic positioning, there are also mechanical positioning and locking devices (REIT has a patent) that help position the platform at a certain position and lock so that the car moves smoothly and accurately without bouncing .

Main parameters:

Drive motor: 15kw

Moving speed: 0.1-1.1m/s

Motor of mechanical positioning and locking device: 2.2kw

Pos.5 Chain lowering kit with 12 layers

The chain unloader is used to retrieve and store pallets whose blocks have been processed, and are loaded onto a conveyor belt to block and return the pallets for recycling.

Its technical data resembles that of a chain elevator, which lowers pallets containing processed products.

Thiết bị phun Pos.6 (thiết bị phun nước)

This device is designed primarily for the following purposes:

1. Prevent dust and dirt when packing dry blocks and cleaning empty pallets.

2. Keep moisture inside the final blocks for more curing to achieve certain hardness.

Pos.7 Dry block conveyor

It is used to pick up the pallets together with processed products, and separate the two pallets at the same time, then transfer them to the pallet brush and block making device, and then transfer the cleaned pallets to the pallet brush device. The pallet was rotated.

Combined with the fixed bucket and mobile frame, the moving frame can move the pallet horizontally one step in one cycle. The movement of the frame is controlled by the motor through the rack and pinion device. Start and stop positions are controlled by a highly sensitive switch. There is a separate separation device for pallets at the beginning of the dry block conveyor.

Main parameters:

Drive motor: 5.5kw

Transport speed: 0.42m/s

Pos.8 automatic block making plant

The function of the automatic block stacker is used to stack processed products from pallets to product pallets on the black conveyor belt. According to different blocks, the layers, height and block style can be adjusted. Cuber can move, lift and rotate automatically at the same time.

Cuber includes frame, moving vehicle, lifting device, rotating device and clamping. Cuber's frame is bridge type and has moving rails on top. The moving vehicle is driven by a SERVO engine through a crank and rocker mechanism and moves along the rails, meeting production needs. The lifting device to which the clamps are fixed is 2 sturdy steel columns with 4 V-shaped guide rails and is driven up and down by hydraulic cylinders. The rotating device is motor-driven and makes the clamps rotate 90 degrees to the left and right separately. The clamps are two crossed clamps, one is main, one is secondary. They are driven by cylinders with a synchronous mechanism. Above the cube there is a maintenance platform with a safety net.

Hydraulic actuator

The independent hydraulic station includes oil tanks, valves, cylinders, cooling and heating equipment, filters and pipes. Parts and cylinders are high quality products of world famous companies such as American Uranus and Yuken brand etc. so that the station operates reliably.

Electronic control system

Horizontal travel position, rotation angle and lifting height are controlled by digital coding. There are protection devices in the system.

Main parameters:

Effective height of block 50-1200mm

Range of main clamp; 840-1400mm

Range of auxiliary clamp: 940-1400mm

Tongue tangle: ±90°

Lifting capacity: 650kg

Horizontal motion drive power: 5kw（SERVO)

Rotary drive power: 0.75kw

Hydraulic pump motor: 22kw

System hydraulic pressure: 16mpa

Pos.9 pallet cleaning brush

It's a rotating brush for cleaning pallets. The brush is a highly durable nylon brush and is supported by a steel frame. The height of the brush can be adjusted. It is driven by motor through chain.

Main parameters:

Drive power: 0.75kw

Pos.10 pallet turning equipment

It is used for turning empty and cleaned pallets driven by a low rotation speed motor. The device is controlled by limit switches, proximity sensors and equipped with beam sensors for safety protection.

Main parameters:

Drive power: 0.75kw

Pos.11 Horizontal pallet transfer equipment

It is used to transfer empty pallets to rotary equipment and transfer rotated pallets to pallet hoppers. Combined with the fixed bucket and mobile frame, the moving frame can move the pallet horizontally one step in one cycle. The movement of the frame is controlled by the motor through the rack and pinion device. Start and stop positions are controlled by a highly sensitive switch.

Main parameters:

Drive power: 7.5kw

Moving speed: 0.47m/s

Pos.12 Pallet Hopper

It is used to store pallets. Use highly sensitive electric switches to control the position and quantity of pallets.

Main parameters:

Storage quantity: 4 pieces/pallet (steel)

Pos.13 Pallet collection hopper

The pallet collection hopper is used to supply pallets to the block making machine at the start of production, when the lower unit is not working to supply empty pallets to the block making machine. Its other purpose is that during the production process it is used to stack empty pallets for forklifts to take away.

Pos.14 plate conveyor

It is used to transport and store cubes. The blocks are removed by forklift from this equipment and transferred outside. The support of the conveyor belt is metal bars made of steel. The conveyor system is driven by a motor and moves in a fixed step. Controlled by a highly sensitive mesh device, it can transport

Pallets and blocks arrive

Design position accurately.

Main parameters:

Drive power: 7.5kw

Length: 11m

Moving speed: 0.18m/s

Pos.15 Pallet Products Magazine

It is used to store pallets and feed bar conveyors to meet the demand for automatic block making machines. The rails extend in three directions to help position new pallets accurately. The synchronously linked pull line ensures the pallet lies up and down vertically in the magazine. Hydraulic and pneumatic control systems are used.

Pos.16 overpass

Pos.17 Mixing and mixing plant (for base)

Pos.17.1 Composite hopper (for base)

Three (3) aggregate hoppers, each with a capacity of 20m3 are used to store sand and rocks. It includes stationery frame and storage hopper.

The stationery frame is used to support the hopper and fix the weighing system and concrete conveyor.

The hopper is a mesh steel frame, so its durability and rigidity are increased. There are two exits to load aggregate into each hopper. The output of the hopper is controlled by pneumatic cylinder, it can realize fast or slow mixing, improving accuracy and speed. There is a vibrating device in the hopper used to contain fine aggregate, helping to unload the aggregate smoothly.

Pos.17.2 Weight belt

Weighing and batching of aggregates using load cell sensors. Belt conveyor consists of frame, support roller, side roller, drive and drive drum, cleaning device, rubber conveyor belt.

Main parameters:

Maximum weighing capacity: 3000kg

Dynamic weighing accuracy: ±2%

Motor: 4.5kw

Effective conveyor capacity: 300 tons/h

Pos.17.3 Hoister aggregate (for base concrete)

It is used to transport aggregates in batches to the mixer. It includes windshield, lifting hopper, rails for lifting hopper. Limit switches can control starting and stopping at any position.

Main parameters:

Hopper: 3480L

Drive motor: 18.5kw

Pos.17.4 JN2000 mixer (for foundation concrete)

It is an advanced planetary mixer. The character is two arms that can not only rotate along the main axis, but also rotate along its axis. Mixing evenly and quickly.

Main parameters:

Model: JN2000

Power: 75kw

Load capacity: 3000L

Compacted concrete per batch: 2000L

Pos.17.5 Cement scale (for base)

Cement scales are used to mix cement. It is fixed above the mixer and is made up of a mixing hopper and 3 load cells. The main part is the products of the SVA Series and RAP Series of Italy Mix Company. The mixing hopper is controlled by a screw program control device. It can provide precise raw materials.

Main parameters:

Maximum weighing capacity: 1000kg (for base)

Weighing accuracy: ±2%

Pos.17.6 Mixer Platform

Support for mixers.

Pos.17.7 Base concrete conveyor

To transport mixed concrete from the mixer to the hopper of the brick press.

Main parameters:

Drive motor: 5.5kw

Effective conveyor capacity: 360t/h

Pos.17.8 Water measurement and humidity measurement

Microwave Humidity Measurement Hydronix is equipped with the basic mixer, a microwave sensor inside the basic mixer. A micro water pump is used to measure the amount of water entering the mixer. Computer controlled water and humidity dosing control for fully automatic base mixer.

Pos.17.9 Two cement silos (customers produce domestically)

Cement silos have ash collectors equipped with level gauges and air shut-off devices. There are two silos, their capacity will be 80-100 tons. Of the two bunkers, at least one has a lightning protection device above.

Pos.17.10 two cementing screws (for basic mixer)

The screws transport cement from the silo to the cement weighing hopper. Length about 8 meters.

Main parameters:

Transport capacity: 20-25 tons/hour

Motor: 7.5kw

Water supply system Pos.17.11

Provide water source for mixing system, built by customer.

Pos.18 Mixing and mixing station (for face) (optional)

Pos.18.1 Aggregate hopper (for face)

An aggregate hopper has a capacity of 12m3, mainly used to store fine sand. The steel plate welded structure has two independent exhaust ports, the opening and closing of which is driven by the cylinder. It can achieve fast and slow mixing when mixing and weighing, and improve mixing accuracy and speed. The fine aggregate hopper is equipped with a vibrating device to ensure that the material flows smoothly during mixing.

Pos.18.2 Weight belt (for face)

The weighing belt measures and batches aggregates using load cell sensors. Belt conveyor consists of frame, support roller, side roller, drive and drive drum, cleaning device, rubber conveyor belt.

Main parameters:

Maximum weighing capacity: 1000kg

Dynamic weighing accuracy: ±2%

Motor: 3kw

Effective conveyor capacity: 300 tons/h

Pos.18.3 Aggregate Hoister (for surface concrete)

It is used to transport aggregates in batches to the mixer. It includes windshield, lifting hopper, rails for lifting hopper. Limit switches can control starting and stopping at any position.

Main parameters:

Hopper: 580L

Drive motor: 5.5kw

Pos.18.4 planetary mixer (JN330 for face)

This is an advanced planetary mixer. The character is two arms that can not only rotate along the main axis, but also rotate along its axis. Mixing evenly and quickly.

Main parameters:

Model: JN330

Power: 7.5kw

Load capacity: 500L

Compacted concrete per batch: 330L

Pos.18.5 Wet concrete conveyor

The conveyor belt is used to transport mixed aggregate to the hopper of the brick press. Including support frame.

Main parameters:

Drive motor: 5.5kw

Effective conveyor capacity: 300t/h

Pos.18.6 Cement scale (for face)

Main parameters:

Maximum weight capacity: 300kg (for face)

Weighing accuracy: ±2%

Pos.18.7 Water measurement and humidity measurement

Measuring humidity with a microwave Hydronix is equipped with a facial mixer, a microwave sensor inside the facial mixer. A micro water pump is used to meter the amount of water entering the face mixer. Computer controlled water and humidity dosing control for fully automatic face mixer.

Pos.18.8 Cement silo (domestic production customers)

A 60 ton silo has an ash collector equipped with a level gauge and gas shutoff. There is a lightning protection device above.

Pos.18.9 A cement screw

The screws transport cement from the silo to the cement weighing hopper. Length about 8 meters.

Main parameters:

Transmission capacity: 20-25 tons/hour

Motor: 7.5kw

Pos.19 intelligent control and management system (ICMS)

The electrical control group includes hardware and software.

Hardware includes electrical control cabinets, control panels, PCs, PLCs, remote communication modules, sensors, etc. The main components come from world-famous brands such as: PLC central controller from Siemens, inverter from Toshiba, operating buttons and joysticks from Schneider, limit switches from Bedook from Germany, moisture meter (providing accurate measurement of material moisture ensuring precision technology) from Hydronix of England, encoder from Omron of Japan. The PC is using control configuration software. The host system has a friend interface, data input and output, graphic display function. Operators can easily and quickly set parameters and grasp the operating status of the entire production line at any time. English operation interface is also available in this system.

The software part includes the following functions:

1) Intelligent calculation function module

This module mainly performs the implementation of the logical function of judgment and action. For example, the operation of electromagnets, raw material formulation processing, and ensuring material moisture, etc. Through the intelligent operation function module, it is possible to accurately and effectively coordinate the operation of execution equipment, according to the needs of the technological process, to achieve the goals of conservation operations. The whole system has extra effects super energy wise.

2) Cloud network communication function module

This module mainly coordinates distributed I/O communication issues as well as remote debugging and screening capabilities. Manufacturing equipment used in various functional areas can ensure safe and highly efficient equipment operation. Real-time recording of batching plant's material ratio, wet dryness and running status; It can also record the real-time trajectory and status as well as the innovation product maintenance status of the finger car; Support remote troubleshooting, reduce downtime, improve equipment utilization; For the standard project, the engineer can install the machine at home by remote debugging, shortening the scene in the cycle, and putting it into production in advance.

3) Fault diagnosis and fault tolerance/correction function module

This control system includes program operation, fault tolerance and error correction. Through this function, equipment damage caused by incorrect operation and damage caused by injury can be effectively avoided, and can promptly remind the operator to make necessary adjustments, to The operating system becomes “stupid”. Significantly reduces operator knowledge level requirements, saving on artificial costs.

4) Cloud management module

This module has the function of combining with today's industry 4.0, using the internet to realize the cloud management factory. Owners can view the factory anytime, anywhere through the data reporting network, and according to the reports, you can manage the entire factory and adjust the data to achieve maximum resource utilization. resources and optimization efficiency.

5) Cloud diagnostic function module

This module functionality includes local and remote diagnostic functionality. By controlling internal alarm codes with remote network support, it is possible to quickly and accurately diagnose specific causes of incidents and corresponding treatments, truly achieving “zero-time time” to eliminate and solve the problem.

6) Smart management system

This system provides management functions for users. It can store dozens of products about its production data and recipes, to shorten product changeover time after debugging, and automatically record each shift and month of production to facilitate standardization. production planning and production statistics. All this data can be sent to the manager upon request.

When the intelligent management and control system is used, there is less need for operating personnel, it is possible to complete all equipment operations in the central control room, under automatic conditions to achieve to the point of not requiring supervision; With high reliability, high performance sensors ensure the accuracy and uniformity of mixing materials; By controlling the frequency of the motor speed control, to ensure the appearance, durability and high uniformity of the product; Through a strict control program, the device operates stably and increases its lifespan. The use of Bluetooth technology makes laying car cables with your fingers simpler and easier to maintain. Using industrial networks makes control more modern and effective. Currently, this control system has been evaluated as a high-end system both domestically and internationally.

The electrical control group includes the following subsystems:

1. Block machine control subsystem

2. Transport control subsystem

3. Automatic cube control subsystem

4. Car control subsystem with fingers

5. Mixing and mixing control subsystem

These control subsystems are integrated into one and operated in a central room, not only controlling the entire line with a digital logic control system but also controlling each system independently. The system can be linked and locked together to ensure safety.

Pos.19.1 Block machine control subsystem

Refer to Pos. first

Pos.19.2 Transport control subsystem

To control: Green Block Conveyor, Rotary Brush, Chain Elevator, Chain Lowerer, Dry Block Conveyor, Pallet Cleaning Brush, Pallet Rotator, Pallet Transfer Device, Pallet Hopper and Oiler for Pallet `Pallet scraper.

Pos.19.3 Automatic cube control subsystem

Cuber, including Shale Conveyor and Product Pallet Magazine, is controlled by Siemens Siematic S7 PLC. The control desk includes joysticks for manual machine operation and a Siemens digital display for data input and output as well as a fault diagnosis system.

Pos.19.4 Finger car control subsystem

The Siemens Siematic S7 PLC and power supply are integrated into the console which includes a joystick for manual machine operation and a Siemens digital display for data input and output as well as a fault diagnosis system.

Pos.19.5 Mixing and Mixing Control Subsystem

Pos.19.5.1 Mixing and mixing control of base concrete

Automatically controls the mixing and weighing of base concrete, water and moisture measurement, mixing and transportation to the block making machine. It can input parameters related to the controller according to the production frequency of the brick press, the batching and mixing system can feed, mix, water meter, measure moisture and transport aggregate to the hopper of the press brick. The transport is also controlled automatically and manually. Statistics and data storage can be done by computers, which can memorize many formulas.

Location. 19.5.2 Automatic surface mixing controller (optional)

Similar to Pos.20.5.1

Location. 19.5.3 Special functions and advantages

1. “one touch to reset”

Advantages: First, convenient operation should minimize the need for operator expertise. Second, the new system displays error reasons. Third, the fault tolerance function helps the machine to self-check and start.

2. Services via the Internet

Advantages: First, eliminating impact on the machine, thereby extending the life of the device. Second, upgrading can help the machine run more smoothly. Third, it will shorten the casting cycle and improve the qualified rate. In general, it can reduce raw material costs and reduce maintenance costs.

Compressed air group Pos.20 Group

Pneumatic is the impact device of equipment associated with batching and batching plants, block machines, pallet feeders, pallet rotating equipment and pallet oiling equipment. This group includes air compressors, pipes or hoses, filters, cylinders, valves, etc.

Bảng công suất

Sản phẩm	Dung tích	RT15A	Vật mẫu
Máy lát nền 20010060mm	Mảnh/Pallet	60
	m2/giờ	216
	10000m2/năm	103,7
Gạch nhiều lỗ 24011590	Mảnh/Pallet	46
	Mảnh/Giờ	11040
	10000 mảnh / năm	5299
Gạch rỗng tiêu chuẩn 390190190mm	Mảnh/Pallet	15
	Mảnh/Giờ	3000
	10000 mảnh / năm	1440
Gạch tiêu chuẩn24011553	Mảnh/Pallet	85
	Mảnh/Giờ	20400
	10000 mảnh / năm	9792
Khối thủy lực	Mảnh/Pallet	số 8
	Mảnh/Giờ	1080
	10000 mảnh / năm	518
Khối đặc 400200200 (8inch)	Mảnh/Pallet	15
	Mảnh/Giờ	2700
	10000 mảnh / năm	1296
Khối đặc 400200150 (8inch)	Mảnh/Pallet	18
	Mảnh/Giờ	3240
	10000 mảnh / năm	1555.2
Khối đặc 400200100 (4inch)	Mảnh/Pallet	30
	Mảnh/Giờ	5400
	10000 mảnh / năm	2592

INDUSTRIAL Swine Breeding COMPLEX PROJECT - 150,000 head/06 months-300,000 head/year

DỰ ÁN TỔ HỢP NUÔI LỢN CÔNG NGHIỆP - 150.000 CON/06 THÁNG
TT	Chi phí đầu tư	Tiền - USD	Tiền - VND

1	Nhà máy SX thức ăn 20 tân/giờ	4.000.000	92.000.000.000
2	Hệ thống SX khí Biogas 300 Kw/giờ	835.000	19.205.000.000
4	Xây dụng hạ tầng,chuồng trại - 150.000 con	14.000.000	322.000.000.000
5	Vốn mua 150.000 con Lợn giống	4.000.000	92.000.000.000
6	Vốn lưu động(06 tháng) cho nhà máy TA và Trại N	5.000.000	115.000.000.000
	Cộng :	27.835.000	640.205.000.000

	PHÂN TÍCH LỢI NHUẬN TRONG 06 THÁNG	Tiền - USD	Tiền - VND
1	Giá 01 Kg Lợn hới, Sau 6 tháng chăn nuôi	2,75	63.250
2	Tổng trong lượng xuất chuồng sau 06 tháng là :
	150.000 con x 100 Kg/con = 15.000.000 Kg
	15.000.000 Kg x 2,75 USD/Kg = 41.750.000 USD	41.250.000	948.750.000.000
3	Vậy doanh thu bán lợn trong 01 năm là :	82.500.000	1.897.500.000.000
4	Nếu tính lãi 22 % trên doanh thu-Lợi nhuận 1 năm :	18.150.000	417.450.000.000

BẢNG PHÂN TÍCH NUÔI 01 CON LỢN TỪ KHI NHẬP-XUẤT BÁN-06 THÁNG
TT	Chi phí đầu tư	Tiền - USD	Tiền - VND

1	Mua Lợn giống	27	613.180
2	Chi phí thức ăn : 2 Kg x 180 ngày	175	4.025.000
4	Nhân công 125 người-400 USD/người/tháng	2	46.000
5	Điện nước 8,4 Kw x 0,1 USD	1	23.000
6	Chi hí lãi vay 4%/06 tháng	9	207.000
	Cộng :	214	4.914.180
	Doanh thu bán Lợn 100 Kg x 2,75 USD	275	6.325.000
	Lợi nhuận của 01 con lợn- 06 tháng	61	1.410.820
	Qua bảng phân tích trên ta có đủ cơ sở kết luận : Dự án trên hoàn toàn
	đạt được lợi nhuận 22% trên doanh thu 5,5%/tháng (So với tổng mức đầu tư)

66%/năm so với tổng mức đầu tư

Những vấn đề cốt lõi mà chủ đầu tư cần phải học thuôc.

1-Để nuôi 01 đầu Lợn, nhà đầu tư cần phải có vốn trung hạn (60 tháng).
Với mức : 4.000.000 VND/01 đầu Lợn.
2-Sau một vòng quay 06 tháng-Mỗi đầu Lợn sẽ sinh lời được 1.400.000 VND. Nhưng nhà đầu tư phải trả (Lãi 6% của 06 tháng) là 240.000 VND.
Và trả gốc (10%) là 400.000 VND . Vậy nhà đầu tư chỉ còn giữ lại được số tiền là 760.000 VND/01 đầu Lợn. Vậy số tiền còn đọng lại của 06 tháng là : 114 tỷ VND và số tiền của 01 năm là : 228 tỷ VND.
3-Vấn đề phòng chống dịch bệnh cho Lợn,là vấn đề số 1 được quan tâm, đặt lên hàng đầu. Cần thiết phải biên chế 01 phòng Thú Y-Khoảng 10 người.
4-Cần quan tâm tới các vùng nguyên liệu, cho nhà máy SX thức ăn,vì mỗi tháng nó cần tới : min là 10.000 tấn nguyên liệu.
5-Cần thiết liên lạc với các công ty Bảo hiểm của VN và nước ngoài, để ký HĐ Bảo Hiểm cho từng lứa 06 tháng.

Nhà máy SX thức ăn cho Lợn - 20 tấn giờ

HỆ THỐNG SẢN XUẤT KHÍ BIOGAS – 300 KW/giờ
1-Bồn hóa khi INOX(304) - 1000 m3
2-Bồn tích khí BIOGAS 8kg/cm2 : 80 m3.
3-Hệ thống thiết bị nén BIOGAS vào bình tích.
4-Bể bê tông chứa bình hóa khĩ : 400 m3.
5-Hệ thống phát điện : 300 KW/giờ
6-Toàn bộ hệ thống Van + ông đi kèm.
7-Nhà xưởng chứa toàn bộ hệ thống : 600 m2.
*Giá cho toán bộ hệ thống BIOGAS trên

THIẾT KẾ-XÂY DỰNG-DỊCH VỤ-CỦA CÁC NHÀ MÁY KHÍ SINH HỌC Biogas

Lò phản ứng thẳng đứng với máy khuấy trung tâm. Hoăc máy, sục khí phản hồi .Công nghệ tiên tiến với khả năng tiêu hóa sâu hơn. Được sử dụng rộng rãi trong các ngành công nghiệp, chăn nuôi & thực phẩm khác nhau.
CÔNG NGHỆ MỚI
Đối với các nhà máy sản xuất Đường + Nhà máy sử lý Rác thải và nhà máy sản xuất Ethenol.
Chúng tôi có thể cung cấp thiết bị và công nghệ của (Germany) :
-Sử dụng bã thải của nhà máy
-Sản xuất ra : Khí Biogas và bột giấy cao cấp.

hóa khí Biogas : Inox(304) – 1.000 m3 (H : 6,8m- ĐK : 14 m)